AT&T System 75 Telephone User Manual


 
Phone Features
The following features can be used no matter which communications system your
8101, 8102, or 8110 telephone is behind. Remember that you can use the
Speakerphone and Mute features only if you are using an 8110 telephone. Some
8110 users will also be able to use the Auto Answer feature; check with your system
manager.
Answering and Placing a Call
Note: If you are using the 8110 telephone, you can place and answer calls either by
going off-hook (by lifting the handset) or leaving the handset on-hook and by
pressing
[ Spkr ] . Pressing [ Spkr ] simultaneously activates the built-in microphone so
that you can place and answer calls without lifting the handset.
If you are using the 8102 telephone, you can connect an external speakerphone to the
Speakerphone/headset jack on the bottom of your telephone. For procedures on
answering and placing calls with the adjunct speakerphone, refer to the instructions
that came with the equipment.
To answer a call
1
Pick up handset
2
Speak to other party
To answer a call using
1
When you hear the telephone ring,
the speakerphone (for
press
[ Spkr ]
8110 users)
Red light next to [ Spkr ] goes on
2
Speak to other party
To place a call
1
Pick up handset
[dial tone]
2
Dial desired number
To place a call using the
1 While on-hook, press [ Spkr ]
[dial tone]
speakerphone (for 8110
Red light next to [ Spkr ] goes on
users)
2
Dial desired number
13