AT&T SL82658 Cordless Telephone User Manual


 
31
Telephone operation
Call transfer using intercom
Models SL82318/SL82418/SL82518/SL82558/
SL82658
1. While on an outside call, press INT. The screen
will display TRANSFER TO:
2. Enter a handset number, 1-9 or *0-*2. The
transferring set’s screen will show CALLING
HANDSET X. The called handset will ring, and its
screen will show HANDSET X IS CALLING.
3. On the ringing handset, press PHONE/FLASH,
INT, SPEAKER, or any dial pad key (0-9, * or
#) to answer the intercom call. You can now
talk without the outside caller hearing the
conversation.
4. Press OFF/CLEAR on the transferring handset
or place it in the telephone base or handset
charger to complete the transfer. The transferring
handset’s screen will show CALL TRANSFERED
and the other handset will automatically be
connected to the outside call.
NOTES:
1. Before the intercom call is answered, you can cancel the
transfer and return to the outside call by pressing
OFF/CLEAR, PHONE/FLASH, or INT.
2. If the called handset does not answer the intercom call
within 100 seconds, is in directory or caller ID history
mode or is or out of range, the transferring handset will
show UNABLE TO CALL TRY AGAIN on its screen and will
automatically return to the outside call.
3. You can switch between the intercom call and the outside call
by pressing INT on the transferring handset. The display will
change between INTERCOM and OUTSIDE CALL to indicate
which call is active.
4. You can end the intercom call and return to the outside call
by pressing PHONE/FLASH on the transferring handset.
5. If you register two or more accessory handsets (for a total
of three or more), the feature of call transfer using intercom
will be the same as models SL82318/SL82418/SL82518/
SL82558/SL82658. If you want to transfer the call to handset
10, 11 or 12, enter the handset number as *0, *1 or *2
respectively on the calling handset.