Filter
Top Products
14
Getting started
Mounting bracket procedure
Wall-mount to desktop installation
To change the telephone base to the desktop position:
1. Remove the telephone base from the wall and unplug the telephone line
cord from the wall plate. Loop the telephone line cord through the largelarge
rectangular opening in the middle of the bracket, making sure both cords, making sure both cords
are pointing downwards as shown in Figure 10 below.
2. Untie the bundled telephone cord and power adapter cord. Place the telephone
base on a flat surface with the antenna on the left side as shown in Figure 11.
Figure 11. Unbundled cords
Antenna
Figure 10. Cord routing