Filter
Top Products
16
Telephone operation
Intercom call transfer
Models SL82308/SL82408
1. During a conversation with an external call, press
INT. The external call is automatically placed
on hold and TRANSFER TO: is displayed on the
screen.
2. Enter the destination handset number (1, 2, 3 or
4). The originating set’s screen will show CALLING
HANDSET X. The destination handset will ring,
and its screen will show HANDSET X IS CALLING.
3. On the ringing destination handset, press
PHONE/FLASH, INT, SPEAKER, or any dial pad
key (0-9, * or #) to answer the intercom call. You
can now talk without the external caller hearing
the conversation.
4. Press OFF/CLEAR on the originating handset
or placing that handset in the telephone base
or handset charger to complete the transfer.
The originating handset’s screen will show CALL
TRANSFERRED and the other handset will
automatically be connected to the external call.
NOTES:
1. Before the intercom call is answered, you can cancel
the transfer and return to the external call by pressing
OFF/CLEAR, PHONE/FLASH, or INT.
2. If the destination handset does not answer the intercom
call within 100 seconds, or if the other handset is in the
directory or call log mode, or out of range, the originating
handset will show UNABLE TO CALL TRY AGAIN on its
screen and will automatically return to the external call.
3. You can switch between the intercom call and the outside call
by pressing INT on the originating handset. The display will
change between INTERCOM and OUTSIDE to indicate which
party is active.
4. You can end the intercom call and return to the external call
by pressing PHONE/FLASH on the originating handset.