Filter
Top Products
Multiple handset use
19
Multiple handset use
Handset locator
The handset locator feature is useful if you misplace
any handsets.
To start the paging tone:
Press
HANDSET LOCATOR
at the telephone base
to start the paging tone on all handsets for 60
seconds.
To stop the paging tone:
• Press PHONE/FLASH, SPEAKER, or any dial pad
key (0-9, *, or #) on the handset(s),
-OR-
• Press HANDSET LOCATOR on the telephone
base.
Join a call in progress
You can conference with another system handset while on a call. If a handset is
already on a call and you would like to join the call, press
PHONE/
FLASH
or
SPEAKER
on another system handset.
Press
OFF/
CLEAR
or place the handset in the telephone base or charger to exit
the call. The call ends when all handsets hang up.
NOTE: If you press OFF/CLEAR or MUTE/DELETE on
a handset, the ringer of the handset is silenced but
the paging tone continues.
NOTE: The handset ringer volume also determines the
level of the paging tone. If the handset ringer volume
level is set to off, that handset is silent for all calls and
paging (page 9).
NOTE: You can only use two system handsets at the same time on an outside call.
++QBHJOH++