AT&T E5654B Cordless Telephone User Manual


 
55
Appendix
CL flashes in
message win-
dow
Reset the clock in the answering system (see page 32).
Common cure
for electronic
equipment
If the unit is not responding normally, try putting the cordless handset
in the telephone base or the charger. If it does not seem to respond,
try the following (in the order listed):
Disconnect the power to the telephone base.
Disconnect the battery on the cordless handset and the spare bat-
tery in the telephone base.
Wait a few minutes before connecting power to the telephone base.
Re-install the battery pack and place the cordless handset into the
telephone base or charger.
Wait for the cordless handset to synchronize its connection with the
telephone base. To be safe, allow up to one minute for this to take
place.
Troubleshooting
Problem Suggestion