Filter
Top Products
10
Telephone Operation
CHAN
MUTE
REDIAL
TRANSFER
MENU/SEL
10
Telephone Operation
Cordless handset programming
Each cordless handset operates as an individual unit.
The ringer sound, ringer volume, date/time, dial mode
and language must be programmed separately for each
cordless handset. Follow the steps below to program
the cordless handset. To stop at any time, press
OFF.
Choose cordless handset ringer sound
1. Press MENU to begin programming.
2. Press ^ or V until the screen displays
RINGER:
and the current setting.
3. Press SELECT to start changing current setting.
4. Press ^ or V to display 1, 2, 3, or 4. You will hear
a sample of each ringer sound.
5. Press SELECT to choose displayed ringer sound and
exit.
Choose cordless handset ringer volume
1. Press MENU to begin programming.
2. Press ^ or V until the screen displays
RINGER
VOLUME
.
3. Press SELECT to start changing current setting.
4. Press ^ or V to display 1, 2, 3, or OFF. You will
hear a sample of each ringer volume.
5. Press SELECT to choose displayed ringer volume and
exit.
Set cordless handset display date and time
1. Press MENU to begin programming.
2. Press ^ or V until the screen displays
DATE/
TIME
.
3. Press SELECT to view or change date and time.
4. Press
^ or V to start changing month in the date
and time line at the bottom of the display, then press
SELECT.
5. Repeat Step 4 to set day, hour, minute, and AM/PM.
6. Press
SELECT to save selection and exit.
RINGER: 1
DATE/TIME
1/01 12:00
AM
NOTE: You can choose to set the time manually, or you can allow it to be
set automatically with incoming Caller ID information. The time will be set
automatically only if you subscribe to Caller ID service provided by your local
telephone company (see page 5).
RINGER VOL: 2
NOTE: If the cordless handset ringer is turned off, the screen will display
RINGER OFF when the cordless handset is idle (not in use). If there are
any un-reviewed calls, the screen will display XX MISSED CALLS instead
of RINGER OFF.