Filter
Top Products
NOTE:
Press HOLD/PAUSE to enter a 1½ second pause in a number if, for instance, you want the
system to wait for a dial tone or access tone before continuing dialing. If the line you are using
is customized as a PBX/Centrex line and the code has been customized into the system, the system
will put the pause in for you. Consult the person in your company who maintains your system.
A "switchhook flash," sometimes used for local dialing services or PBX/Centrex codes, may be
entered as the
first
button press in a number by pressing RECALL/DROP. A total of 16 digits,
pauses, and the one flash may be stored as one number.
■
Erasing Numbers
6-Button Telephone:
●
Press INTERCOM.
●
Lift receiver (or press SPEAKER).
●
Dial
✱
0 (zero).
●
Press MEMORY.
●
Dial two-digit code for
24-Button Telephone:
●
Press INTERCOM.
number you want to erase.
●
Lift receiver (or press SPEAKER).
●
Dial
✱
0 (zero).
●
Press MEMORY.
●
Press auto-dial button of number you want to erase.
■
Changing Numbers
Follow the instructions for storing numbers. Be sure you change your Reference Card directory
and the auto-dial labels on 24-button telephones.
■
Using SpeedCall
Instructions for using
SpeedCall
are on pages 14 and 15.
33
SpeedCall