AT&T CL82209 Cordless Telephone User Manual


 
Telephone operation
21
Handset operation
Speakerphone
During a call, press SPEAKER to switch between hands-free speakerphone
and normal handset use. Press OFF/
CLEAR to hang up.
Last number redial
To view the five most recently dialed numbers:
To display the most recently called number (up to 30
digits), press REDIAL/
PAUSE.
To view up to five recently called numbers, press
REDIAL/
PAUSE then TCID or DIRS, or press
REDIAL/
PAUSE repeatedly.
The handset beeps twice at the beginning and at the end of the list.
Press OFF
/CLEAR to exit.
To redial a number:
To dial the displayed number, press PHONE/FLASH or SPEAKER.
-OR-
You can call the most recently called number by pressing
PHONE/FLASH or SPEAKER, then pressing REDIAL/
PAUSE.
While reviewing the redial memory, press
MUTE/DELETE to delete the
displayed number.
NOTES:
1. If you use the speakerphone during LOW BATTERY mode,
the handset is not lit except for the SPEAKER button.
2. The speakerphone uses more power than the normal
handset. If the handset battery becomes very low while you
are using the speakerphone, the call remains in
speakerphone mode until you hang up or the battery
becomes depleted. When the battery is very low, you cannot
switch a call from normal handset use to speakerphone
mode.
3. After installing the battery into the handset, the screen may
show LOW BATTERY. If you use speakerphone at this time,
the battery may become depleted. Follow the instructions in
the Battery installation & charging section on pages 6-7.
TQFBLFS!!!1;11;41!!
Elapsed time
SFEJBM
999.994.3556