Filter
Top Products
21
ANSWERING SYSTEM OPERATION
FROM A REMOTE TOUCH TONE PHONE
Deleting Messages
1 Connect with the answering system, and begin playing
messages.
2 While the message is playing, press # 9.
Recording Outgoing Announcement
1 Connect with the answering system.
2 Press * 7, and begin recording your announcement.
3 When you’re finished recording, hang up.
Reviewing Outgoing Announcement
1 Connect with the answering system.
2 Press # 7.
Recording a Memo
1 Connect with the answering system.
2 Press * 8, and begin recording your memo.
3 When you’re finished recording, hang up.
Remote ON/OFF
Turning System Off
1 Connect with the answering system.
2 Press # 0. The system announces the new on/off status. (Pressing
# 0 again changes the status again.)
Turning System On
1 When the system is off, or if memory is full, the system answers after
10 rings, and prompts you to enter your Remote Access Code.
2 Press # and enter your Remote Access Code.
3 Press # 0 to turn the system on.
9050_book.1AT&T 8/12/98, 4:15 PM21