Filter
Top Products
9
Handset Volume
Adjust the handset volume to high (H) or low (L) using the switch on the side
of the handset.
Temporary Tone
NOTE: If you have touch tone service, you do not need to use the Temporary
Tone feature.
If you have dial pulse (rotary) service, this feature allows you to enter codes or
tones needed to operate answering machines, or use electronic banking services,
calling cards, and other special services. This feature will operate most special
services; however, some services may actually require a touch tone line. To be
sure, ask the company that provides the special service.
1 Dial the call, then press *. Any buttons pressed after this send tone
signals.
2 After you hang up, the phone automatically returns to dial pulse (rotary)
dialing.
Special Telephone Services
If you subscribe to special local telephone company services like Call Waiting
or Call Forwarding, you can access them by pressing P whenever you
would press the switchhook on a corded phone. This is like the Flash feature
on some other phones.
Page/Handset Locator
The Page feature allows you to signal someone at the handset from the base.
You can also use this feature to help you locate the handset.
Press G on the base. The handset will ring four times before ending
automatically. Press o on the handset or G on the base to cancel
the page.
OPERATION
9050_book.1AT&T 8/12/98, 4:14 PM9