Filter
Top Products
20
Speed dial
Store a number in a speed dial location
There are 14 speed dial locations (seven upper and
seven lower). To access an upper location, press a
speed dial key. To access a lower location, press
LOWER, then press a speed dial key.
Access the desired speed dial location as
described above.
Enter the telephone number you want to
store (up to 24 digits). Press CALL LIST to
backspace and make corrections.
-OR-
Press REDIAL to store the last number dialed
(up to 24 digits).
Press PROG to save the entry in the location you
pressed in step 1. The screen displays STORED.
NOTEs:
If the speed dial location you pressed in step
1 above is occupied, delete the number before
storing a new number.
If the number you entered is over 24 digits, the
screen displays ONLY 24 ALLOWED.
Store a pause or flash in a speed dial entry
Press CALL LIST twice to store a pause in thetwice to store a pause in the
dialing sequence (P displays). Press FLASH to store
a flash in the dialing sequence (F displays).
Store a call history number in a speed dial
location
Press CALL LIST or CALL LIST to scrollto scroll
through the call history.
Press PROG, then press a speed dial key.
-OR-
Press PROG, then press LOWER and a
speed dial key to store the number. The screen
displays STORED.
NOTE: If the speed dial location you pressed in
step 2 above is occupied, the new telephone
number replaces the old one. Take caution not to
replace entries you do not wish to delete from the
speed dial locations.
1.
2.
3.
•
•
1.
2.
LOWER
LOWER
LOWER
Speed dial