Filter
Top Products
7
Installation options
Wall installation
Reverse the handset tab.
This tab holds the handset when you hang up. Hold down the switch hook,
and slide the handset tab up and out of its slot. Turn the tab so that the
end with the hook is up, then insert the handset tab back into its slot.
1.
Getting started
Reposition the mounting bracket for wall use.
Press on the mounting bracket as shown in Figure A to release the bracket.
Rotate the bracket as shown in Figure B so that the larger end is toward
the bottom of the telephone. Secure the bracket by positioning it as shown
in Figure C, and pressing it (as shown by arrow) into the telephone base
until it locks in place.
2.
Figure A Figure B Figure C
Switch hook
Handset tab