Filter
Top Products
Getting started
8
Route the telephone line cord.
Plug one end of the telephone line cord into the telephone line jack on
the top of the telephone base, and then route the line cord through the
slot on the bottom of the telephone base. Route the telephone line cord
around the bracket, leaving the last few inches of the line cord for wall jack
connection.
3.
Connect the telephone line cord to a wall jack.
Plug the other end of the telephone line cord into a wall jack or a DSL
filter.
4.
Installation options
DSL filter (not included) is required if you have
DSL high-speed Internet service. The DSL filter
must be plugged into the telephone wall jack.
Route through this slot