Filter
Top Products
Getting started
5
Installation options
The telephone base comes with the mounting bracket already installed for
tabletop use. If you want to mount your telephone on a wall, use the provided
wall bracket to connect with a standard dual stud telephone wall mounting
plate. If you do not have this mounting plate, you can purchase one from many
hardware or consumer electronic retailers. You might need a professional to
install the mounting plate.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
through your telephone line, you must install a DSL filter (not included)
between the telephone line cord and the telephone wall jack. The filter
prevents noise and caller ID problems caused by DSL interference. Please
contact your DSL service provider for more information about DSL filters.
Tabletop installation
Follow the instructions below to install your telephone to tabletop position.
Check the mounting bracket.
The telephone’s mounting bracket is positioned for tabletop use. Make sure it
is secure by pressing the two feet.
1.
Connect one end of the telephone line cord to the jack labeled TEL on
the back of the telephone.
2.
Telephone wall jack
Telephone
line cord
DSL filter (not
included) is required
if you have DSL
high-speed Internet
service. The DSL filter
must be plugged into
the telephone wall
jack.
Connect the other end of the line cord into a telephone jack or a DSL filter. 3.