AT&T ATT993 Conference Phone User Manual


 
42
One touch operation (speed dial)
One touch (speed dial)
Dial a one touch number
If the auto speaker is turned on, numbers will be dialed
using the method selected in the Set preferred mode
on page 21. If the preferred mode is Headset but no
headset is connected, the number will be dialed using the
speakerphone.
Press and release a one touch key.
— OR —
Press and release LOWER, then press the desired one
touch key. The number is dialed automatically and
displayed on the screen.
If Auto Speaker is turned off, or if you want to use
the handset or headset regardless of the auto speaker
programming:
Lift the handset.
— OR —
Press SPEAKER.
— OR —
Press HEADSET and listen for a dial tone.
Press and release a one touch key.
— OR —
Press and release LOWER, then press the desired one
touch key.
The number is dialed automatically and is displayed on
the screen.
-OR-
While you are viewing the one touch entry:
Press or until the screen display includes DIAL.
Press Enter.
NOTES:
For more information about the auto speaker setting, see Turn auto
speaker on or off on page 19.
If there is a 30-second wait in the dialing sequence, press any dial
pad key or one touch key to end the wait and continue the dialing
sequence.
1.
2.
1.
2.
1.
2.