10
Getting started
Connect the telephone line cord(s) to the telephone and the modular
wall jack(s).
If there is a single two-line wall jack, use only the black (4-connector)
telephone line cord. Plug one end into the jack labeled L1 or L1/L2 on
the back of the telephone. Plug the other end into the wall jack. Make sure
the telephone line cord snaps firmly into place at both ends.
1.
Telephone installation
Two-line modular
wall jack
Black telephone
line cord
If there are two one-line wall jacks, use both telephone line cords. Insert
one end of the clear telephone line cord into the jack labeled L1 or L1/L2
on the back of the telephone. Then, plug the other end into the wall jack
for Line 1. Insert one end of the black telephone line cord into the jack on
the back of the telephone labeled L2. Then, plug the other end into the
wall jack for Line 2. Make sure the telephone line cords snap firmly into
place at both ends.
Modular
wall jack for
Line 1
Modular wall
jack for Line 2
Clear telephone
line cord
Black telephone
line cord