Filter
Top Products
20
NOTE: When you make a call, the phone selects the Prime Line you
programmed. When you answer a call, the phone automatically selects
the ringing line.
Making or Answering a Call
NOTE: This phone will automatically make and answer calls in the mode
(speakerphone or headset) you programmed (see “Set Automatic Audio
Mode”in FEATURE SETUP). Follow the directions below to choose a mode
manually. If the phone is in use on one line, any other calls made
or answered will use the same mode already in use.
NOTE: If you dial a phone number longer than 15 digits, the screen
will display only the last 13 digits.
Handset
To make a call, lift the handset and dial the call.
To answer a call, lift the handset. Replace the handset to end the call.
To override automatic line selection, lift the handset,then press and
release a LINE button
— OR —
Press the LINE button for the line you wish to select,then lift the handset.
Speakerphone
To make a call, press and release the desired LINE button or K.
The SPEAKER light goes on. Wait for a dial tone, then dial the call.
To answer a call, press K or press the LINE button of the incoming
call. Press K again to end the call.
NOTE: If headset is programmed as the default mode (see “Set
Automatic Audio Mode” in FEATURE SETUP), you must press K to
activate the speakerphone.
Headset
You can use this phone hands-free when you install a 2.5mm headset.
Headsets are available for purchase in retail stores (comcode #108041732)
or by calling 1 800 222-3111.
Make sure the headset is plugged into the headset jack located to the left
of the handset jack on the left side of the telephone base. You will hear a
double-beep if you press h and the headset is not plugged in.
NOTE: If headset is programmed as the default mode, (see “Set
Automatic Audio Mode” in FEATURE SET UP) but the headset is not
plugged in, the phone will switch to speakerphone.
TELEPHONE OPERATION