Filter
Top Products
Before You Install
1 Choose a location for the base near an electrical outlet and a
telephone jack.
This phone requires a modular telephone jack and a standard electrical
outlet (110v AC) not controlled by a wall switch.
2 Install the handset battery.
1
INSTALLATION
b) Plug battery
pack connector
into handset.
Use only AT&T
battery 3301
(SKU# 91076).
d) Replace cover
by sliding it up
into place.
a) Remove
battery
compartment
cover by
pressing on
the indentation
and sliding
downward.
c) Place battery
pack and wires
in compartment.
9353_book_1ATT 6/7/01 1:56 PM Page 1