Filter
Top Products
15
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
Connect with the Answering System
You can access many features of this system remotely from a touch tone
phone.
1 Dial your telephone number.
2 When the system answers,press #, then enter your
Remote Access Code (preset to 19). The system beeps twice.
3 Within two seconds, enter a remote command (see “Remote Access
Commands”on page 16).
4 Press *0to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press
*5to hear the menu while remotely connected to the answering system.
Remote Access Commands
Function: Command:
Play messages in Press #,then the appropriate mailbox
a mailbox number (1,2, or 3). The system plays
new messages. If there are no new
messages,the system plays old messages.
Repeat a message Press # 4 while message is playing;
each press backs up another message.
Skip a message Press # 6 while message is playing;
each press advances another message.
Stop Press # 5.
Save messages Hang up.
Delete message Press # 9 while message is playing.
Review announcement Press # 7;system plays announcement,
then beeps.
Record announcement Press * 7;after beep, record
announcement,press # 5 to stop.
System plays back announcement.
9353_book_1ATT 6/7/01 1:56 PM Page 15