Filter
Top Products
16
CAUTION: To reduce the risk of fire or injury to persons or damage to
the telephone, read and follow these instructions carefully.
• Use only Replacement Battery 3740.
• Do not dispose of the battery in a fire. The cell might explode. Check
with local codes for special disposal instructions.
• Do not open or mutilate the battery. Released electrolyte is corrosive
and may cause damage to the eyes or skin. It may be toxic if swallowed.
• Exercise care in handling batteries in order not to short the battery
pack with conducting materials such as rings, bracelets, and keys. The
battery pack or conductor may overheat and cause harm.
• Charge the battery provided with or identified for use with this product
only in accordance with the instructions and limitations specified in
this manual.
• Make sure the battery is inserted properly so the metal contacts on the
battery are aligned with the charging contacts in the battery
compartment.
Charging the Handset Battery Pack
The batteries need charging when:
• The LOW BATT light on the handset is on.
• The phone does not respond when you press a line button, and the
line buttons do not light.
Place the handset in the base so the CHARGING light goes on. The batteries
will be fully charged in 10 hours (16 hours for the first charge).
NOTE: For optimum battery performance, do not place the handset in the
base until the LOW BATT indicator lights.
Replacing the Handset Battery Pack
1 Remove the battery cover by pressing on the indentation and sliding
downward.
2 Lift out the old battery pack.
3 Install the new battery pack so that the metal contacts on the bottom
of the battery are aligned with the charging contacts in the battery
compartment.
4 Replace the battery cover by sliding it on its track up over the battery
compartment until it snaps firmly in place.
BATTERIES
9002_book.1AT&T 8/12/98, 4:09 PM16