Filter
Top Products
14 Issue 1 March 1996
2. Do one of the following:
a. Press , and then press the dial keypad number assigned
to the Call Pickup feature.
b. Press an idle call appearance button, then dial the Call Pickup
feature access code _____.
■ You are connected to the incoming call.
Conference 0
The Conference feature allows you to set up a six-party conference call without
attendant assistance. You cannot create a conference call when the first party is
the attendant.
To establish a conference call while on a two-party call, do the following:
1. Press .
■ The existing call is put on hold, and you hear a dial tone.
2. Dial the number of the new party, and wait for an answer.
■ You can privately discuss the call with the new party at this time. If
you want to establish the conference call, continue with Step 3.
If there is no answer or the line is busy, press the held call appear-
ance button to return to the held call.
3. Press again.
■ All parties are connected on the conference call.
4. Repeat Steps 1 through 3 to add more parties to the conference call.
To create a conference call when you have a call on hold and you have a
second active call, do the following:
1. Press .
■ The active call goes on hold, and you hear a dial tone.
Feature
Conf
Conf
Conf