AT&T 7700 Cordless Telephone User Manual


 
Storing a Pause in a Memory Dial Number
When storing a number in memory, press and hold down the
number button that comes before the pause, until you hear the
second beep. This inserts a 2-second pause after that digit. If
you hold the number button down longer, you will hear more
beeps as additional pauses are stored.
NOTE: Each pause you store is counted as a digit. You can
store up to 24 digits in each memory location.
For example, to store 9, PAUSE, 555-1212 in memory location
9: Press p, 9 (hold the 9 for 2 seconds until a second
beep is heard), then press 5, 5, 5, 1, 2, 1, 2, p, 0, 9.
Priority Ring
If you’ve stored a number in memory and marked it as a VIP
caller, when a call comes in from that number, the phone rings in
a special way to alert you to this special call. Follow the direc-
tions below to mark a memory location as a VIP caller.
1 Press p.
2 Press m.
3 Press + or - to scroll through locations
— OR —
Enter the memory location number (01 - 20).
4 Press m. The screen displays the VIP icon. (To
remove VIP status, press m again.)
5 Press p to store VIP status.
Reviewing Memory Numbers
1 Press p.
2 Press m.
3 Press + or - to scroll through memory locations and
view numbers (press > to view a name after a
displayed number, if stored)
— OR —
Enter a location number (01-20) to review.
Deleting Memory Numbers and Names
You can delete the information in a single memory location or
in all memory locations.
1 Press p.
2 Press m.
3 Press + or - to scroll to the desired memory location.
4 Press L. The screen displays CLEAR?
5 Press L to delete the memory information.
To delete all memory location information.
1 Press p.
2 Press m.
3 Press + or - to scroll to TOP OF LIST, then follow
Steps 4 and 5 above.
TELEPHONE MEMORY
6