Filter
Top Products
ANSWERING SYSTEM
PROBLEM SOLUTION
If appears in the You need to reset the cl o ck . The answe ri n g
message window: system clock is not set automatically with
incoming Caller ID information.
PROBLEM SOLUTION
If the system does not • Make sure you are calling from a touch
respond to commands tone phone. When you dial a number,
from a remote touch you should hear tones. If you hear clicks
tone phone: instead,the phone is not a touch tone
telephone.
•The answering system may not detect
the Remote Access Code while your
announcement is playing. Try waiting
until the announcement is over before
entering the code.
• Make sure you enter your Remote Access
Code correctly.
•There may be noise or interference on
the phone line you are using. Press keys
firmly.
PROBLEM SOLUTION
If your outgoing • When you record your announcement,
announcement isn’t make sure you speak in a normal tone of
clear: voice,about nine inches from the base.
• Make sure there is no “background”noise
(TV,music,etc.) while you are recording.
7 0
5840_CIB_2ATT 2003.3.5 6:12 PM Page 69