Filter
Top Products
3
INSTALLATION
4 Connect the handset.
Plug one end of the coiled handset cord into the jack labeled
HANDSET on the back of the telephone. Plug the other end of
the coiled cord into the handset, then hang up.
5 Connect the power adapter.
Connect the power adapter to the jack
on the back of the base. Run the cord
through the strain relief groove. Plug
the other end into a standard electrical
outlet not controlled by a wall switch.
NOTE: The power cord is the antenna for
FM radio reception; reception is improved
when the cord is fully extended.
6 Install the battery.
CAUTION: Always unplug all cords before installing batteries.
• Turn the telephone upside down.
• Remove the screw on the battery compartment door.
• Install the 9V alkaline battery,replace the battery compartment
cover,and turn the telephone over.
7 Manually set time and date.
• Press and hold T for about 1.5 seconds. The screen displays
SET TIME? and a number for the month (for example,March
is 3 ).
NOTE: The screen automatically displays SET TIME? when you first
install it.
• Press + or - to change the month. When the screen displays the
correct month, press T to save.
• Press + or - to change the date. When the screen displays the
correct date, press T to save.
• Press + or - to select AM or PM and the hour. When the screen
displays your selection, press T to save.
• Press + or - to set minutes. When the screen displays the
correct minutes setting, press and hold T for about 1.5 seconds
to save all settings.
NOTE: The time is automatically reset with incoming Caller ID
information for each call.