AT&T 360 Telephone User Manual


 
15
Turning Radio On/Off
Press I to turn the radio on or off. When you turn the radio on, the
screen displays the currently selected station, band, and MHz or KHz.
You can access Caller ID information while the radio is on.
NOTE: If you receive a call while the radio is on, the screen will display
Caller ID information during the call, and for about 30 seconds after
you hang up. You will be unable to tune the radio station during this
30 seconds.
Selecting AM or FM
After pressing I, press and release b to select AM or FM reception.
Auto Tuning
Press and hold + or - for about 1.5 seconds to move to the next clear
radio station.
Manual Tuning
Quickly press and release + or - to move to the next radio station.
Volume
Move the volume control on the right side of the radio to the back to
increase volume or to the front to decrease volume.
The radio is automatically muted whenever the phone rings. Volume is
restored when you hang up.
Sleep Timer
You can set the radio to turn itself off after 30, 60, 90 or 120 minutes.
1 Turn the radio on.
2 Press and release Z.
3 Press and release Z until the screen displays how long you want
the radio to play before turning itself off (30, 60,90 or 120 minutes).
The screen displays the selected time for about five seconds, then
returns to the radio display.
4 Press Z for more than 1.5 seconds to set the sleep time. The sleep
time flashes for about five seconds,then the system screen returns to
radio mode.
RADIO/ALARM OPERATION