AT&T 360 Telephone User Manual


 
9
About Caller Identification
This telephone is designed to store and display information about incoming
calls. It must be used with Caller Identification service provided by your
local telephone company;there is a fee for this service, and it may not be
available in all areas. This phone can provide information only if both you
and the caller are in areas offering Caller Identification service, and if both
telephone companies use compatible equipment.
When you use this phone with Caller ID service, you can see who’s
calling before you answer the phone. The phone keeps a record of the
names and numbers of the last 70 calls, whether you answer the call
or not. Each call is numbered in the call history, with newer calls having
higher numbers.
NOTE: Caller ID features will not operate without AC power.
Call Waiting
Caller ID with Call Waiting allows you to see who’s calling even while
you’re on another call. This feature requires Caller ID with Visual Call
Waiting, a combined service available through your local telephone
company. If you are already subscribing to Caller ID and Call Waiting as
separate services, you need to request a subscription to Caller ID with
Visual Call Waiting as a single,combined service. If you choose not to
use the Call Waiting feature, this unit will also work with regular Caller ID
service. Such services are not available in all areas. If you wish to answer
a Call Waiting call, press and release F. To return to the original call,
press and release F again.
Reviewing Call History
The screen displays call information for about 30 seconds after it is
received.
1 Press C to enter the call history.
2 Press + or - to review call history.
3 The screen displays END OF LIST at the end or beginning of the
call history to indicate you have reviewed all calls.
Removing a Call from Call History
Press and release r to remove displayed information from the
call history. The screen displays CALL REMOVE?. Press r again.
The screen displays the next call in call history. To exit,press C
or wait a few seconds for the screen to return to standby.
CALLER ID OPERATION