Filter
Top Products
WALL INSTALLATION
1. Reverse the handset tab.
When mounting the telephone on a wall, you must
reverse the handset tab. This tab holds the handset when
you hang up. Hold down the switchhook, and slide the
tab up and out of its slot (Figure 1). Turn the tab so that
the end with the “hook” is up (Figure 2). Then insert the
tab back into its slot (Figure 3).
2. Fill in directory card
The enclosed directory card has an adhesive backing
which lets you place it in a convenient location near the
telephone. Write in your own telephone number and up
to nine other numbers you want to remember on the
directory card.
3. Plug the line cord into the jack on the underside of
the base
Feed the short line cord into the channel. Feed the last
portion (as short as possible), through one of the slots in
the mounting area.
4. Install telephone base on wall jack
Hold the base up next to the wall jack and plug in the line
cord. Then push the base against the wall jack and down
until it is held securely by the mounting studs.
3
INSTALLATION
Figure 1 Figure 2 Figure 3