Filter
Top Products
11
Telephone Operation
Customizing the base
Follow the steps below to program the base. To stop at
any time, press CLEAR. If the phone rings, programming
stops automatically so you may answer the call.
Choose dial mode
1 Press PROG to begin programming.
2 Press > until screen displays
DIAL MODE
& setting.
3 Press SELECT to change current setting.
4 Press > to display TONE or PULSE.
5 Press SELECT to select displayed dial mode and exit.
Choose base display language
1 Press PROG to begin programming.
2 Press > until screen displays
LANGUAGE
.
3 Press SELECT to change current setting.
4 Press ^ to display ENGLISH, ESPANOL or FRENCH.
5 Press SELECT to select displayed language and exit.
DIAL MODE: TONE
LANGUAGE
NOTE:
Base ringer volume can be set by adjusting the switch on the
side of the base. This switch affects only the base ringer volume; the handset
ringer volume remains unchanged.
91-5783-10-00_ATT1487_R0.qxd 6/2/2003 12:14 PM Page 11