AT&T 1030 Cordless Telephone User Manual


 
When the Do Not Disturb feature is active, the green light next
to your line button flashes when you receive outside calls, but
your voice terminal does not ring. Calls transferred to you return
to the sender after a prescribed number of rings (set by your
system administrator), and intercom calls to you get a busy
signal.
The feature remains active until you:
Touch
Do Not Disturb
again.
The green light next to the button goes out.
Do Not Disturb
NOTE:
If you have a Cover button for one or more people (see
“Call Coverage,” page 34), their voice terminals ring when you
call them on the intercom from your voice terminal even if they
are using the Do Not Disturb feature.
PRIVACY
If you share an outside line with other people connected to your
MERLIN
system, you can use the Privacy feature to prevent
others from accidentally joining your telephone conversations.
Program this feature on a button with lights.
To program:
T/P to P
Touch the button
Dial *72
T/P to center
To prevent others from joining your calls:
Before placing or receiving a private call, touch
Privacy.
The green light next to the button goes on.
Privacy
37