AT&T 1030 Cordless Telephone User Manual


 
When you receive a call for a person you’re covering, your voice
terminal rings and the green light next to that person’s Cover
button flashes. To answer the call:
Lift your handset.
You can program Cover buttons so covered calls ring im-
mediately, after a delay, or don’t ring at all (see “Programmable
Line Ringing,” page 43). If you program a Cover button not to
ring, the green light still flashes next to the Cover button when
a call comes in, and you can still answer the call:
Touch the Cover button.
Lift your handset.
Cover John
+
If someone is covering your calls, you may want to program your
voice terminal to ring after a delay, but your voice terminal can-
not be set to “no ring.” If you share lines with another person,
use Programmable Line Ringing to cover one another’s calls
(see “Programmable Line Ringing,” page 43).
Coverage Inhibit
With a Coverage Inhibit button, you can temporarily turn off the
Call Coverage feature so your calls don’t ring at another voice
terminal. Program this feature on a button with lights.
To program:
T/P to P Touch the button Dial *77
T/P to center
To stop Call Coverage:
Touch
Coverage Inhibit.
The green light next to the button goes on.
Coverage
Inhibit
35