Filter
Top Products
IPS-2000 Series User’s Manual/使用手冊
16
Check WAN port IP
address
#126# ◆Check the current IPS-2000 Series WAN port IP address
Check Firmware
Version
#128#
Set DHCP client
#111# ◆Change to DHCP client setting
Set Static IP
#112XXX*XXX*XXX*XXX# ◆every X represent a number
Set Mask IP
#113XXX*XXX*XXX*XXX#
Set Gateway IP
#114XXX*XXX*XXX*XXX#
Set DNS Server
#115XXX*XXX*XXX*XXX#
Set Codec
#130+[1-8]# ◆(1)G711 u-Law, (2)G711 a-Law, (3)G723.1,
(4)G729a ,(5)G726 16K, (6)G726 24K, (7)G726 32K,(8) G726 40K
Set the codec you want to the first priority
Set Handset Gain
#131+[00~15]#
Set Handset Volume
#132+[00~12]#
2.6 Inbound Function
1.Inbound means making phone call from PSTN line into FXO port of
IPS-2000 Series, then
transit to the Internet and reach the other end of VoIP gateway FXS. The process as below(A->B)：
2.Outbound means making phone call from FXO line into PSTN port of IPS-2000 Series, then
transit to the Internet and reach the other end of VoIP gateway FXO. The process as below(B->A)：
IPS-2000 Series Inbound Steps
[Step 1 Account Registration]
First make sure the IPS-2000 Series is successfully registered with your ISP, have a SIP number assigned to
you and also have a PSTN number from local telephone company.
[Step 2 Active Inbound/Outbound Function]