Filter
Top Products
Quick Installation Guide IPF-3000
-13-
3. Date/Time
z Choose the item and press【HOLD】to configure:
1. Date: System date
2. Time: System time
3. Date format: date displaying format
4. Time zone (default is GMT+00:00）
Use digits key【0】~【9】to switch between +/-
5. DST settings (day-light saving time, default is 0:00)
Note: if you want to keep the date and time you manually set, you must disable SNTP
synchronization from 7.3.1-SNTP Mode; otherwise, it will synchronize system
time with assigned NTP server.
4. Ringer
1. Ringer volume: (Adjust the ringing volume on incoming calls arrival).
z 【＋】and【－】to increase or decrease ringing volume.
2. Ringer type: (Pick your favorite ringing tone)
z 【＋】 and【－】to listen your favorite ringing, press 【HOLD】to save your
setting.
z To enable “13. User-defined” ringing tone, you must first record it via handset.
3. Record ring: (Personalize user-defined ringing tone)
z Pick up handset to prepare for ring recording.
z Press 【HOLD】to start recording your own ringing tone.
z On finish, press another【HOLD】to stop recording ringing tone.
z You can review the newly recorded ringing tone or press “1.Save” to replace the
originally “13.User-defined” ringer type. Press【FUNC】to re-record again.
z You can record nearly 8 seconds customized ringing tone.
5. Lock
z 『Main Menu』=>『3.Phone settings』/『8. Lock』
z 『1.=Y』to lock out the phone such that it could not make outbound calls (but still could
take incoming calls, or『2.=N』to cancel this operation and press【HOLD】to confirm.
After locking out the phone, to unlock it, you need the phone password.