Filter
Top Products
Quick Installation Guide IPF-3000
-6-
(4) Press 【SPK】 to exit the configuration menu and the system will try to register to those
activated SIP domains. The flashing green LED of 【Registration】key indicates that the
registration is undergoing. Once the green LED stops flashing, you could know the
registration result by the LED:
Green LED On: Successfully register to all active service domains.
Red LED On: At least one service domain could not be registered.
Green LED Flashes: Registration is in progress.
Red LED Flashes: No service domains have ever registered successfully.
Or press【Service Realm】to show registration status of each active service domain:
0 : a - v o i z ee . c o m
0 :
f
w d .
p
u l v e r . c o m
X
: u n k n o w n . c o m
0: Registered domain
X: Registration failed domain (Retry after 90 seconds).
IV. Phone Calls
Press【SPK】to switch between hands-free and handset mode. However, if you switch to
hands-free mode with handset lifted (off-hooked), the phone will be in loud-speaker mode:
it continues transmitting voice from handset, not from microphone, and played voice to both
speaker and handset receiver simultaneously. It will help clarify the voice of talker while
letting all persons in the same room listen. The phone will activate microphone for voice
transmission only when it is on hands-free mode and the handset is on hook. This applies to
ear-phone mode as well. In loud speaker mode with ear-phone enabled, the ear-phone could
hear voice but not speak-able.
1. How to dial out?
f
w d .
p
u l v e r . c o m
3 2 0 0
By default, you can gain access to active Service-Domain-N by line-N whenever
applicable. That is, the default service domain of [B call] is 2
nd
active service domain
if available; otherwise, it will use the 1
st
active service domain as default.
Moreover, you could change the target service domain while making calls by pressing
【Service Realm】to circle those active service domains (no matter whether they have
registered or not), but must before dialing the ‘#’, which finishes the dialing. The active
service domain will appear on the upper-right corner.
a-voize.com
fwd.pulver.com
Auto-locate