Filter
Top Products
Quick Installation Guide IPF-3000
-5-
by DHCP or PPPoE, you should choose【1.static DNS】and set the IP of your specific
DNS into【5.Static DNS】, such as “1.Primary DNS” = 192.168.3.254*
【*】Value should be adjusted to your real network environment
Note: if you reside on a LAN without gateway, you should specify the gateway IP as
“0.0.0.0” rather than assigning a non-existent or an invalid IP.
3. SIP Service
(1) Let’s assume that you have obtained the following information from your SIP ISP:
z Account: Michael
z Password: secret
z SIP AoR: 8888@isp.com
z SIP Proxy/Registrar Server: sip.isp.com, which serves on UDP port 5060
(2) 『Main Menu』=>『6.Network』/『2.SIP settings』/『2.Service domain』/『1.1
st
Realm』
z Activation: Enabled
z Authentication: Note: please remember to check for ending blanks and spaces;
if you erroneously input the ending spaces, the whole string (including
ending spaces) will be treated as your password without trim).
1. Server login: Michael
2. Server passwd: secret
z Address of record:
1. Display Name: Michael Jr. (Could be any combination of alphabets and numbers)
2. Protocol: sip
3. Sip:8888@isp.com
z Proxy server:
1. Configuration: 2.Use default
2. Default proxy:
1. Proxy FQDN: sip.isp.com
2. Transport: 1.UDP (or 3.TCP and UDP)
3. UDP port: 5060 （SIP proxy listening UDP port of your ISP.）
4. TCP port: 5060 (leave default intact)
z Registrar
1. Configuration: 1.Same as proxy
2. Registrar svr: leave default intact since the registrar and proxy server provided by
your ISP are the same
(3) If you have applied for more than one service domains, please repeat step (1) and (2) until
all active domains are properly configured. IPF-3000 supports three different active service
domains at most.