Filter
Top Products
IPF-2600 User’s Manual/
47
Ⅶ
ⅦⅦ
Ⅶ. Frequently Asked Questions (FAQ)
1. How do I know that IPS-2600 Registration is complete?
A: If IPF-2600 is registered successfully; the Registration number will be displayed on LCD. If “No Service” is
displayed on LCD that means the Registration is not complete. System requires 2 minutes to complete
Registration for IPF-2600.
2 . After connecting to power source and activating phone device, why do I see “ETHERNET ERROR”
on my LCD?
A: Check if Ethernet Cable is correctly connected. If it is connected, please check your network connection.
3. Can I dial the phone if a blackout occurs?
A: Gateway will have no power supply if a blackout occurs. At this point of time, the IP phone will not be able
to dial or receive phone calls. A blackout won’t have any effects on the PSTN line, so the PSTN line can not
still operate normally.
4. Does IPF-2600 IP phone supports Inbound Transit function?
A : Yes, it supports PSTN Inbound Call. Inbound Transit means that users use a PSTN line to make calls to IP
telephone which connected a PSTN line, and this call will be forwarded to another IP phone through
IVR answer function.
How to Dial An Inbound Transit Call:
Dial a call to your IP telephone through the PSTN line, you will hear a dial tone after the phone rings (3-9)
times, and dial the SIP account number. If PIN code is set you need to input the PIN code before dialing the
SIP number.
5. How to make a PSTN phone call?
A: Pick up the handset, after a dial tone, you can dial a PSTN number or push IP Call switch button to make
an internet call.
6. How to use “Call Hold” function?
A: When you are on a call, press the “Hold” key or “Swap” key to put the caller on hold; to retrieve
the call, press the “hold” key or swap key again.
7. How to use “Call Waiting” Function?
A: When you are on a call, if you hear a dial tone twice that means there is another incoming call for you. If
you want to answer it, press “hold” key or “Swap” key to pick up the call.
8. How to make a “3-way Conference” call?
A: “3-way Conference” call
When you are on a phone with party A (L1) and you want to invite party B to join your conversation,
press “hold ” key to put party A (L1) on hold, and dial Party B’s number (L2) after you hear a dial
tone. When party B is connected, inform party B that there is a “3-way Conference” call you like to invite