Filter
Top Products
IPF-2002L User Manual
15
5.4 Other Settings:
1. Press 1234# (Hold the “#” key) Æ LCD shows【password】Æ Press 1234 and then press
ENTER Æ LCD shows【network settings】Æ Press VOL – several times Æ LCD shows
【other settings】.
2. Configure user password:
【other settings】Æ Press ENTER Æ LCD shows【password】Æ Press SPD/HOLD Æ
Input the new user password and then press ENTER.
3. Configure administrator password:
【other settings】Æ Press ENTER several timesÆ LCD shows【super password】Æ
Press SPD/HOLD Æ Input the new administrator password and then press ENTER.
5.5 Speed Dial Settings:
1. Press 1234# (Hold the “#” key) Æ LCD shows【password】Æ Press 1234 and then press
ENTER Æ LCD shows【network settings】Æ Press VOL – several times Æ LCD shows
【speed dial settings】.
2. Configure speed dial code and phone number:
【speed dial settings】Æ Press ENTER Æ LCD shows【memory 1】Æ Press SPD/HOLD
and input first speed dial code (can be any number or character) Æ Press ENTER Æ LCD
shows【number 1】Æ Press SPD/HOLD and input first speed dial number (can only be any
number) and then press ENTER.
Repeat the step 2 for more speed dial numbers. IPF-2002L has up to 100 entries speed
dial numbers.
5.6 Default Settings:
Press 1234# (Hold the “#” key) Æ LCD shows 【password】Æ Press 1234 and then press
ENTER Æ LCD shows【network settings】Æ Press VOL – several times Æ LCD shows【default
settings】and then press ENTER Æ LCD shows【Are You Sure?】.
• If choose Yes, LCD shows【Default ok】then shows【Undo default setting】. Press
REDIAL/MUTE several times until the LCD shows 【save settings】, save the setting and
reboot the IPF-2002L
• If choose No, IPF-2002L will not load the factory default settings.
5.7 Save Settings:
After all the configuration is done and correct, press REDIAL/MUTE several times until the LCD
shows 【save settings】Æ Press ENTER Æ LCD shows【Are You Sure?】.
• Press ENTER as Yes, IPF-2002L will reboot and load the new settings.
• Press REDIAL/MUTE as No, IPF-2002L will back to phone keypad configuration mode.