Filter
Top Products
IPF-2002L User Manual
20
up the password provided by ISR, card number, and “#”. For example
3185#.
• With MGCP protocol used, enter the domain name of the EndpointID
into this field.
※ With MGCP protocol is used, as requested by some system, please
add the bracket with the domain name. For example, [voiptest.com].
register port
According to used protocol, set as follows:
• With H.323 protocol used,
If the gatekeeper is used, the register port works as the
gatekeeper’s monitor port. The default value is 1719.
If the gatekeeper is not used, the register port works as the end
point device or the gatekeeper’s monitor port. The default value is
1720.
• With MGCP protocol used, this port is the Call Agent’s receive port. The
default value is 2727.
• With SIP protocol used, the default setting is 5060.
signal port
With H.323 protocol used, this port is mapped to the Q.931 port. For H.323,
the Q.931 call usually uses TCP protocol. The value can be set between
1024 and 65535.
control port
z With H.323 protocol used, this port is H.245 port using TCP protocol.
H.245 protocol defines call control signal, and uses TCP protocol. The
value can be set between 1024 and 65535.
z With MGCP and SIP used, there is no specific request for this port. You
can enter any number.
※ If there are many IPF-2002L traversing the NAT at the same time,
each IPF-2002L should be assigned with different port number.
register ttl
This defines how many seconds a register message will be sent to the
server. The default setting is 60 second.
rtp tos
Fill TOS segment of IP header in RTP digital follow here. Detailed
information please refer to IP protocol information.
rtp port
RTP port is the port transferring and receiving voice flow using UDP
protocol. Please fill an even number between 1024 and 65535 into this field.
local type
This parameter refers to how IPF-2002L log in gatekeeper or SIP Proxy
server. The meaning of each item is as follow:
• Phone number:
Use phone number as E.164 and H.323 ID to login the gatekeeper.
• Account
Use account authentication to login. Please also fill up the account name
and password into the account and pin fields.
• H.235 account
With H.323 protocol used, if the gatekeeper supports H.235 protocol,
please choose this option. Please also fill up the account name and
password into the account and pin fields.
call type
Set call type by selecting the items in drop down list. There are three
options: normal, faststart, advanced. The recommended way is advanced.
dtmf
Set DTMF signal sending way by selecting control string, inband audio,