Filter
Top Products
9
8 Plug the adaptor in socket-outlet which is near equipment and easily accessible.
9 Place the Handset in the Base cradle. The Handset and Base communicate with each other
automatically. This is the Registration process, and it may take up to 60 seconds.
10 Allow the Handset to charge for a day for the first time charging. The CHARGE indicator on the
Base will glow
while the Handset is charging.
Basic Operation
With the Handset idle (on hook), and the battery pack having at least a minimum charge, it will display:
READY
When you name your Handset (see Handset Naming), it will replace ‘READY’.
Answering Calls
If auto answer is disabled, press Talk/End, or any numerical key (0 to 9), or * or # .
If auto answer is enabled, the incoming call is answered by removing the Handset from the charger. If the
Handset is not cradled, simply press Talk/End, 0 – 9, * or #.
You can end your call by pressing:
●Talk/End, or
●Place the Handset in the charger
Display presentation for incoming calls:
An incoming call without caller ID:
EXTERNAL CALL
If your local service provider sends the caller ID information, it is shown in the display instead of ‘external
call’. The caller ID either shows the calling number alone:
987-654-3210
or, in addition to that, caller’s name and time/date information.
The name, which will be shown in the second line, may either come from the service provider or from the