Filter
Top Products
19
RECALL
Press CANCEL twice to return to the idle screen.
If the Phone Book is full when the user tries to store a new number in it, a message ‘PHONEBOOK FULL’
is displayed, and the phone returns to the Phone Book menu (Store/Recall) after 5 seconds.
PHONEBOOK FULL
Volume
Handset volume is adjusted by the following key sequence:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press ▼ two times.
>HANDSET VOLUME
RING VOLUME
3) Press PROG to enter the volume sub-menu.
HANDSET VOLUME
4) Enter 0 (quietest) to 7 (loudest); or adjust using ▼/▲ keys.
HANDSET VOLUME
5) Press PROG to confirm the setting. The display returns to:
>HANDSET VOLUME
RING VOLUME
NOTE: During your conversation, the volume can be adjusted with the ▲/▼ keys. The level will be
represented by the number of bars displayed on the screen. If you try to adjust the volume beyond the lower or
upper limits, the Handset will emit an error tone. The display returns to normal in-call presentation after 4
seconds. The default audio volume is 2.
Ring Volume
The ring volume is adjusted by the following key sequence:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press ▼ three times.
>RING VOLUME
RING PATTERN
3) Press PROG to enter the ring volume sub-menu.
RING VOLUME
4) Enter 0 (ringer OFF) to 6 (loudest); -OR- adjust using ▼/▲ keys. The current ring tone is played once at
the selected new volume.
RING VOLUME
5) Press PROG to confirm the setting. The display returns to:
>RING VOLUME
RING PATTERN
Ringing is switched off by adjusting the ring volume to zero. A "Ringer OFF" icon is shown in the display
during idle mode. The default ring volume is 3.
Ring Pattern
The ring pattern of an incoming call is changed by the following key sequence:
1) Press PROG.
>CALL LOG