Filter
Top Products
21
Key Lock
It is possible to lock the Handset keypad. The key lock function is set/reset by:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press the ▼ key seven times.
>KEY LOCK
HANDSET NAME
3) Press PROG to enter the key lock sub-menu.
KEY LOCK
OFF
4) Enable key lock by pressing 1 or ▲, or disable key lock by pressing 0 or DOWN.
KEY LOCK
ON
5) Press PROG to confirm the setting. If ‘ON’ was selected, the phone locks the keypad and returns to idle. A
"key locked" status is shown in the display during idle mode:
READY
KEY LOCKED
If ‘OFF’ was selected, the phone returns to the previous menu.
>KEY LOCK
HANDSET NAME
Unlocking the Keypad
The screen when the keypad is locked:
READY
KEY LOCKED
While keys are locked, pressing any key will generate this screen:
PRESS 159
TO UNLOCK
The message will disappear after 5 seconds.
To unlock the keypad press the key sequence ‘1’,’5’,’9’
READY
NOTE: It is still possible to dial an emergency call when the keypad is locked by pressing first Talk/End and
then the emergency number (e.g. 000,110,112,119,911,999). Key lock is disabled after an emergency call.
Key lock is disabled in the event of an incoming call, but returns to key lock when the call is terminated.
Key lock is disabled when placing the Handset in the charger.
Key lock is disabled by default.
Handset Naming
It is possible to name your Handset. The name is shown in the first line during idle mode, and it replaces the
"READY" indication. The maximum name length is 16 characters.
The Handset is named by following this programming sequence:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press the ▼ key eight times.
>HANDSET NAME
LANGUAGE
3) Press PROG to enter the Handset name sub-menu.
NAME