Filter
Top Products
14 IP 720 User Manual
—CHECK MEMORY (RAM checking state)
—CHECK FW (Firmware checking state)
—INIT NETWORK
—LOADING FW...
—LOADING NOW.
—Boot Done
—INITIALIZING
4. Configure startup network settings. (To display the phone’s menu, as
required below, press the Menu button on the phone. Use the/
buttons to scroll through the menus and settings in the LCD screen.
Press the Enter button to select a menu item or a setting.)
If you are using DHCP, ensure that DHCP is enabled on the IP 720
phone: Menu > NETWORK > ENABLE DHCP > Yes. (DHCP is
enabled by default.)
If your company does not use DHCP, disable DHCP on the IP 720
phone: Menu > NETWORK > ENABLE DHCP > No. In this case,
configure the following network settings on the IP 720 after setting up
the phone:
• Local IP address
• IP subnet mask
• Gateway IP address
5. Configure the MAXCS IP settings (see “Configuring IP Settings” on
page 20 for information about IP settings):
a. Menu > SYSTEM >Enter.
b. Select AW SERVER, and press Enter.
c. Enter the MAXCS server address, using the * key to input periods,
and press Enter.
6. Activate the IP 720 extension from the IP phone:
a. With the handset onhook, press #27, then the Enter button.
b. Enter the extension number and password when prompted.