Filter
Top Products
5.3 PROGRAMMING THE R (FLASH) KEY
To access the additional services offered by your operator or PABX, you need to set the flash time on your VERSATIS Conference.
The available settings are 100ms, 270ms, 500ms and 800ms.
l In Standby mode, press and hold .
"
This takes you into "Phone book programming" mode.
"
The icon appears.
l Press to select flash time programming.
"
The current setting is displayed.
l Press again to select flash time programming.
"
The current selection starts to flash.
l Press the key corresponding to the desired flash time (from to ):
l Press again to confirm the selection.
l Press to exit.
5.4 PROGRAMMING THE VERSATIS CONFERENCE TELEPHONE NUMBER
The VERSATIS Conference is designed to be used by any number of persons. It is therefore useful to indicate to the users the
telephone number corresponding to the VERSATIS Conference.
l In Standby mode, press and hold .
"
This takes you into programming mode.
l Press to select VERSATIS Conference phone number programming.
"
If programmed, the current number is displayed; otherwise the display remains blank.
l Press again to confirm the phone number programming selection.
"
The current number flashes.
Key Flash time (ms)
100 (default value)
270
500
800
34
Versatis_Conference_uk.qxd 31/03/2005 16:03 Page 34