Filter
Top Products
4. FEATURES AVAILABLE DURING CALLS
4.1 ADJUST SPEAKER VOLUME
There are 16 different speaker volume levels.
l Press or to adjust the speaker volume during a call.
4.2 MUTE FUNCTION
When the Mute function is activated, the microphone in the Pod is cut off.
l Press to mute or un-mute a call.
When the call is muted, the icon lights up, and the Pod LEDs switch to red and flash slowly.
4.3 R KEY
A "flash" signal can be sent during a call.
l Press to access additional services provided by your operator or PBX.
See chapter 5.3. "Programming the R (Flash) key" for information on how to adjust the flash time.
4.4 DISPLAY POD NUMBER
The telephone number of the Pod can be displayed for reference during a call. First, check that this function has been correctly
configured (see 5.4 "Programming the VERSATIS Conference telephone number").
l During a call, press .
"
The telephone number is displayed (if programmed).
"
The display reverts to its previous state after 10 seconds.
or
l Press to clear the number from the display and return to the call timer.
32
Versatis_Conference_uk.qxd 31/03/2005 16:03 Page 32