Filter
Top Products
Aiphone JF Series 13710 (28 13 00) - 6
3. Reply of other person is not heard.
4. If other person presses TALK button, hands-free communication is possible.
5. Press and release TALK button to end.
G. Transfer Entrance Call:
1. During communication with door station, press CALL button to call transferring station.
2. Red CALL button flashes and communication with door station is put on hold.
3. “All Call” function is activated to link all master and sub master stations.
4. If TALK button is pressed at transferred station, unit enters room-to-room communication.
Sender informs receiver that communication will be transferred, and TALK button is
pressed and released at either transferring station or transferred station to end room-to-
room communication. Screen continues to display image of door station.
5. If TALK button is pressed at transferred station, communication with door station is
established.
6. Press TALK button to end communication.
H. Automatic Recording:
1. If a call is received from video door station, unit starts recording automatically.
2. Red record LED flashes during recording.
3. Recording starts approximately 2 seconds after CALL button of video door station is
pressed.
4. Maximum length of approximately 8 seconds (8 shots) can be recorded with 1 picture and
1 shot for each second.
5. Maximum of 50 pictures can be recorded (combined total of automatic recording and
manual recording pictures).
6. If 50 pictures are exceeded, pictures are overwritten starting from picture with oldest
recording date.
I. Manual Recording:
1. Display video image with operation such as entrance monitoring.
2. Press REC button. Red record LED flashes and recording starts.
3. Maximum length of approximately 8 seconds (8 shots) can be recorded with 1 picture and
1 shot for each second.
4. Maximum of 50 pictures can be recorded (combined total of automatic recording and
manual recording pictures).
5. If 50 pictures are exceeded, pictures are overwritten starting from picture with oldest
recording date.
J. Play Recorded Picture:
1. Press PLAY button in standby mode to display play screen.
2. Press PLAY button on play screen. Recorded picture is played. When play of 1 picture
ends, next image is displayed.
3. To advance play frame-by-frame, press PLAY button during playback to pause. Play
moves forward frame-by-frame each time REC button is pressed. When frames of 1
picture end, next picture is displayed.
4. Press TALK button to end.
K. Save Recorded Picture:
1. Display picture that you want to save in play screen. Press MENU/MEMO button to
display save/erase selection.