Aiphone GT-2H-L Intercom System User Manual


 
- 18 -
3LSLSL
6(1625$&7,9$7('
5(6(7
Prrrrrr
SENSOR1 ACTIVATED.
STOP
(17(56(&85,7<3,1
&/($5
(17(56(&85,7<3,1
&/($5
Canceling security setting after arrival (master monitor station)
Canceling security alarms (master monitor station)
9-5
9-6
1 When the ABSENCE SECURITY setting in 9-4 is set, if an individu-
al door is opened, a screen will display and the alarm will sound.
At this time, operation other than an emergency alarm cannot be performed.
Ex.: When a call is made from the entrance station, communication will not
start. (The master monitor station is in occupied mode.)
Even if the call tone volume is set to 0 (OFF), it will sound at a level equiv-
alent to 10 (HIGH).
1 When the PRESENCE SECURITY setting in 9-4 is set, if an indi-
vidual door is opened, the security screen will display and the alarm
will sound.
When ABSENCE SECURITY is set, the security screen will display
and the alarm will sound after t
he DEPARTURE TIMER or ARRIV-
AL TIMER has elapsed.
Alarms will also sound at individual door stations, and the illuminator LED
will blink.
Even if the call tone volume is set to 0 (OFF), it will sound at a level equiv-
alent to 10 (HIGH).
2 Press the [ REC/PLAY] to display the security PIN input screen.
Input the security PIN by pressing the [S], [T], [W], and [X] buttons.
When a security PIN is not used, press the [ REC/PLAY] button to re-
store.
3 Press the [ REC/PLAY] to display the security PIN input screen.
Input the security PIN by pressing the [S], [T], [W], and [X] buttons.
When a security PIN is not used, press the [ REC/PLAY] button to re-
store.
2 Press the [ REC/PLAY] button or the [ OFF] button.
The alarm sound will stop.
3 Restoration occurs when the security PIN is correct.
If the security PIN is not correct, "WRONG SECURITY PIN." will display.
There is no limit to the number of times the PIN can be entered, but if a cor-
rect security PIN is not entered within the set delay time (10-9 DEPAR-
TURE TIMER, ARRIVAL TIMER setting), a security alarm sounds.
4 Restoration occurs when the security PIN is correct.
If the security PIN is not correct, "WRONG SECURITY PIN." will display.
Depending on the settings at installation, an alarm may be output to a secu-
rity guard station.