Aiphone GT-2C Intercom System User Manual


 
- 24 -
SECURITY
ABSENCE SECURITY
ALARM TIMER
SECURITY PIN
ABSENCE SECURITY
ARRIVAL TIMER
DEPARTURE TIMER
DEPARTURE TIMER SETTING
0SEC. 120SEC.
30SEC. 300SEC.
60SEC. 600SEC.
TIME DURATION FOR THE ALARM SET
SECURITY
ABSENCE SECURITY
ALARM TIMER
SECURITY PIN
1. Setting the "DEPARTURE TIMER" to "0 SEC." will make a secu-
rity alarm sound immediately when a door or window is opened
when ABSENCE SECURITY is set.
2. Setting the "ARRIVAL TIMER" to "0 SEC." will make a security
alarm sound immediately when a door or window is opened after
arrival.
DEPARTURE TIMER, ARRIVAL TIMER setting10-9
1 After performing steps 1 and 2 in section 10-1, select "SECURITY"
in the "SETTINGS" screen and press the [ MENU] button.
Select the security alarm sound time duration. The initial setting is "10
MIN.".
With ABSENCE SECURITY, the delay time from when an action causing
a warning response is detected to when a warning is actually sent can be
set. The initial setting is "60 SEC.".
DEPARTURE TIMER = Time from when ABSENCE SECURITY is set
to when user leaves
ARRIVAL TIMER = Time from when user arrives to when A
BSENCE
SECURITY is canceled
3 Select "DEPARTURE TIMER" or "ARRIVAL TIMER" in the "AB-
SENCE SECURITY" screen, and press the [ MENU] button.
(Ex.: Selection of "DEPARTURE TIMER")
4 Select the delay time in the "DEPARTURE TIMER SETTING"
screen, and press the [ MENU] button. Repeat the same operation
for the "ARRIVAL TIMER" screen.
2 Select "ABSENCE SECURITY" in the "SECURITY" screen, and
press the [ MENU] button.
Security alarm sound duration time setting
10-10
1 After performing steps 1 and 2 in section 10-1, select "SECURITY" in
the "SETTINGS" screen and press the [ MENU] button.
3 Select the sound time in the "SECURITY ALARM TIMER" screen.
Press the [ MENU] button to complete the settings.
2 Select "ALARM TIMER" in the "SECURITY" screen, and press the
[ MENU] button.
SECURITY ALARM TIMER
10SEC. 1HOUR
1MIN. CONT.
10MIN.
"CONT." = Continuous