NetVanta 7000 Series
FAQs
29
30
31
32
33
34
35
36
37
38
Can one of the Gigabit front-panel interfaces be used for
broadband WAN access?
Yes.
Does the NetVanta 7100 support PRI?
Yes. Switch protocol include National ISDN, Lucent, and Nortel DMS-100.
Are DID trunks supported?
Yes. T1 interfaces will support DID signaling.
What is the maximum number of analog interfaces?
The NetVanta
®
7100 includes two station and two trunk interfaces with optional four-
port plug-in modules available. The maximum number of analog interfaces is ten.
Are SIP trunks supported between NetVanta 7100 systems?
This capability will be supported in a future release.
What type of trunks does the NetVanta 7100 support?
Analog (FXO), T1, and PRI.
Does the NetVanta 7100 support an “integrated” T1 or PRI that delivers
both Internet and voice on the same circuit?
This capability is supported in the AOS 14 release of the NetVanta 7100.
Can two T1/PRI NIMs be installed and what is the application?
Yes. Dual T1s can be configured as 3 Mbps of MLPPP bandwidth for data applications
or two separate T1s for data.
Can we expand the compact flash for voice mail?
Yes. The NetVanta 7100 includes 256 MB of compact flash and the socket is compatible
with industry-standard compact flash cards. Third party compact flash will not be
covered under the ADTRAN warranty.
Is the software programming for the NetVanta 7100 Series
similar to the NetVanta line of switches and routers?
Yes. The NetVanta 7100 Series uses the same AOS as NetVanta switches and routers, so
your previous training will apply. Your staff will only need to learn the telephony aspects
of the NetVanta 7100.