Filter
Top Products
12
Turning the ringer ON and OFF
Note: Do not lift the handset while you are turning the ringer ON or OFF.
Setting the ring tone and ringer volume
You can choose one of four different ring tones and set the ringer volume for each line.
Note: The steps above set the ring tone and volume for one line only. You must repeat these
steps to set the ring tone and volume for the other line.
Controlling the ringer volume
While the telephone is ringing, you can press the left or right side of the volume bar √ for
soft or loud ringer volume.
Controlling the receiver volume
While you are on the telephone, you can press the left or right side of the volume bar √
for soft or loud receiver volume.
Controlling the speaker volume
While you are listening through the speaker, you can press the left or right side of the volume
bar √ for soft or loud speaker volume.
To turn the ringer ON: To turn the ringer OFF:
1. Press the right side of
√. 1. Press the left side of √.
2. Press
¬. 2. Press ¬.
3. Press the right side of
√. Continue
pressing the right hand side until you
reach the desired ring volume.
3. Press the left side of √. Continue
pressing the left hand side until the ringer
is off.
4. Press
ß. 4. Press ß.
Ringer is OFF and the line affected
appear on the display.
To set the ring tone and volume:
1. Make sure that the ringer is turned ON.
2. Press the Set Options key.
3. Press
– three times or press ‹ to got directly to the item.
4. Press
‹and follow the instructions on the display.
When picking the ring tone, press
√ to adjust the volume.
5. Press
ß to end only when you are satisfied with ring tone and ringer volume.
P0802432 02 E 8417UG Page 12 Thursday, March 9, 2000 10:59 AM