Aastra Telecom SIP9133i IP Phone User Manual


 
6
Making Calls
This section describes ways to make calls
on your 9133i phone, using your handset,
speakerphone or headset.
Dialing a Number
First, take the phone off-hook by:
lifting the handset
pressing , or
pressing a line/call appearance
button.
At the dial tone, enter the number you wish
to call. If you are unable to make calls
within certain area codes, check with your
system administrator for any toll
restrictions placed on your extension that
may restrict your access to long distance
area codes or dialing prefixes.
When your party picks up, a timer appears
on your display that records the length of
your call.
Using Handsfree Speakerphone
The handsfree feature allows you to speak
to someone without using the handset or
headset. Your phone must be in either the
Speaker or Speaker/headset audio mode.
You can set your desired audio mode
through #7 Headset Settings in the
options list. For more information, see the
section Customizing Your Phone” in the
9133i Installation Guide.
To dial using handsfree, first press
and enter a number at the
dial tone.
To answer a call on your phone
using handsfree, press
or the line/call
appearance button.
If you are in Speaker audio
mode, lift the handset and
press to switch
between handsfree and handset.
If you are in Speaker/headset
audio mode, press to
switch between handsfree and
headset.
When the handset is on hook,
press to disconnect the
call.
When handsfree is on, the
speaker light turns on.
Using a Headset
The 9133i accepts headsets through the
modular RJ22 jack on the back of the
phone. Contact your telephone equipment
retailer or distributor to purchase a
compatible headset.
NOTE: Customers should read and observe all
safety recommendations contained in
headset operating guides when using
any headset.
Advanced Volume Controls for
the Headset Mic
On the 9133i, there are 3 options for the
headset microphone volume.
To change the volume:
1. Press to enter the options list.
2. Use to scroll down the list of
options to 7Headset Settings and
press to select,
or
Press 7 to jump directly to this option,
and press to select.
Making Calls